|
|
| |
|
|
J-B WELD - Adhesive Weld 28.4GM/28.4GM |
 |
|
Tensile strength 4000 psi after 24 hours
Resistant to constant temperature up to 300 c
Pliable for up to 25 minutes
Permanently bonds metal, plastic, ceramic, wood,
masonary
Can be drilled, filled, sanded, machined, tapped and
painted
25 year shelf life once opened
|
|
|
JB-WELD - Auto Weld 28.4GM/28.4GM |
 |
|
J-B Weld Cold Weld compound has hundreds of uses.
Use for mechanical repairs on automobiles & trucks. Use
around the house for ceramic tile, stove parts, pipes,
and more.
Works on iron, steel, aluminum, brass, bronze, copper,
pewter, wood, porcelain, ceramic, and plastic.
Can be drilled, grinded, sanded, and machined. |
|
|
JB-WELD - Kwik Weld 28.4GM/28.4GM |
 |
|
Tensile strength 2500 psi
Resistant to constant temperature up to 150 c
Cure in four minutes. Full strength in 20 minutes
Bonds metal, plastic, ceramic, wood, masonary
Can be drilled, filled, sanded, machined, tapped and
painted
|
|
|
JB-WELD - Water Weld 28.4GM/28.4GM |
 |
|
Can be applied under water;
Surfaces to be repaired do not need to be clean and dry.
WATER WELD putty ''mushrooms'' through and around holes,
Grabbing the edges to hold securely, then hardening for
a permanent seal.
Can be formed, drilled |
|
|
JB-WELD - Marine Weld 28.4GM/28.4GM |
 |
|
It's impervious to saltwater, chemicals, oil, acids, and
other corrosive materials, and tolerates extreme
temperature fluctuations.
Like metal, MARINE WELD can be formed, drilled, ground,
tapped, machined, filled, sanded, and painted.
Stays pliable for about 2 minutes after mixing.
Sets in just 4 minutes. Cures fully in 4 hours.
Water-proof.
Petroleum, chemical, and acid-resistant.
Resists shock, vibration, and extreme temperature
fluctuations.
Withstands temperatures up to 500° F.
Super strong, non-toxic, and safe to use.
Before it sets, you can clean up with soap and water.
Bonds to virtually any combination of iron, steel,
copper, aluminum, brass, bronze, pewter, porcelain,
ceramic, marble, glass, PVC & ABS, concrete, fiberglass,
wood, fabric, paper -- just about any porous and
non-porous material.
|
|
|
JB-WELD - Industro Weld 141.8GM/141.8GM |
 |
|
Same specification as the standard JB Weld but in a
larger quantity for commercial application.
2 x 5oz tubes (141.8gr)
5 x the capacity of the standard pack- a saving of £6.35
(plus vat) |
|
|
|
|
|
|
|
 |
